LEADERMAC

Máy bào bốn mặt bản rộng - LMC MAXIMAC 300 mm

Máy bào bốn mặt bản rộng - LMC MAXIMAC 300 mm
Khu vực Hồ Chí Minh
  • 175 Hoa Lan, Phường 2, Quận Phú Nhuận, TP.HCM
  • Hotline: 079 2356 799 - 0274 3712 771
  • (84.28) 3517 3407
  • vetta@vetta.com.vn - info@vetta.com.vn - sales@vetta.com.vn
Ưu điểm

Máy bào bốn mặt bản rộng - LMC MAXIMAC 300 mm

Thời gian bảo hành: Máy bào bốn mặt bản rộng - LMC MAXIMAC 300 mm

+ 12 tháng cho phần cơ

+ 06 tháng cho phần điện

  • Moulders có chứng nhận CE.
  • Khung máy bằng gang hoặc thép một mảnh, cực nặng được xử lý nhiệt đặc biệt để có độ ổn định và độ cứng tối đa theo cấu hình tiêu chuẩn.
  • Vỏ an toàn của máy đo nặng đầy đủ đóng vai trò như một bộ phận bảo vệ chip và giúp giảm tiếng ồn.
  • Bề mặt bảng, Thanh dẫn hướng và Bộ phận ngắt chip Máy cắt chip & được mạ crom cứng để chống mài mòn tối đa.
  • Có thể dễ dàng đặt nhiều áp suất khí nén của cuộn nạp (3 trạm nạp, cuộn nạp giữa và cuộn nạp) để mang lại khả năng vượt trội.
  • Nhiều cuộn trên và dưới hơn hầu hết tất cả các tảng cạnh tranh - do đó cho ăn và kiểm soát tốt hơn.
  • Tốc độ nạp liệu nhanh lên đến 48 mpm (175,2fpm) là tiêu chuẩn và lên đến 90 mpm (300fpm) - tùy chọn.
  • Đầu trên có các chùm hỗ trợ bên ngoài tự động khóa / mở khóa khi đặt lại các đầu trên.
  • Máy nối thẳng & định hình cung cấp hoạt động chính xác với chất lượng hoàn thiện cao ở tốc độ cấp tốc độ cao.
  • Vòng bi thay đổi nhanh Hydro-Loc Outboard cho (các) trục chính nằm ngang.
  • Có thể dễ dàng điều chỉnh từng trục chính bằng cách sử dụng mức điều chỉnh phía trước.
  • Các bài đọc kỹ thuật số cho Giày bẻ chip của (các) trục chính trên cùng.
  • Bộ bôi trơn tự động được cung cấp để cung cấp dầu cho bàn nạp liệu.

Máy bào bốn mặt bản rộng - LMC MAXIMAC 300 mm

Máy bào bốn mặt bản rộng

Hệ thống cấp phôi

Cuộn nạp liệu trên / dưới hoạt động cùng với một công tắc hành trình để dừng máy nếu phôi quá dày hoặc nếu có gấp đôi.

Con lăn cấp phôi

Việc nạp nguyên liệu ban đầu suôn sẻ được thực hiện nhờ các cuộn tiến dao được cấp nguồn độc lập. Có nhiều Bánh cuộn trên cùng và dưới cùng hơn hầu hết các đối thủ cạnh tranh và đây là lý do lớn để cho ăn thành công.

Con lăn cấp phôi

Con lăn đè giữ bằng khí nén

Con lăn nạp liệu mạnh mẽ có thể điều chỉnh áp suất không khí giúp nạp liệu ổn định hơn và nhanh hơn.

Con lăn đè giữ bằng khí nén

Trục xoay có độ chính xác cao

Tất cả các trục chính đều được chế tạo chính xác và được xử lý nhiệt đặc biệt để mang lại độ ổn định cắt tối đa và độ chính xác vĩnh viễn. 4 Vòng bi siêu chính xác trên mỗi trục chính cung cấp các trục chính chính xác nhất hiện có. Chúng có khả năng chống nước và chống bụi. Tốc độ trục chính tiêu chuẩn là 6.000 vòng / phút và 7.200 hoặc 8.000 vòng / phút là tùy chọn.

Bôi trơn tập trung

Việc bôi trơn cho tất cả các bộ phận quan trọng được thực hiện một cách thuận tiện nhờ sự sắp xếp tập trung của các điểm bôi trơn được mã hóa màu dọc theo mặt trước của máy

Điều tốc thuận tiện

Việc điều chỉnh tất cả các trục chính có thể dễ dàng thực hiện bằng tay hoặc tự động đối với một số trục chính. Các điểm điều chỉnh đều nằm dọc theo mặt trước của máy, giúp điều chỉnh thuận tiện và nhanh chóng hơn.

Điều tốc thuận tiện

Nối thẳng

Các khớp nối thẳng được điều khiển từ xa cung cấp hoạt động chính xác với độ lặp lại cao. Chúng giúp đảm bảo tuổi thọ lâu dài và chất lượng bề mặt siêu bền. (Option)

Nối thẳng

Bộ điều khiển có thể lập trình

Có thể dễ dàng cài đặt độ rộng và độ dày bằng bộ điều khiển lập trình. Các giá trị mong muốn cho chiều rộng và độ dày có thể được đặt trước một cách thuận tiện và được hiển thị trên đèn LED. Tốc độ được điều khiển bằng biến tần và tất cả các thành phần điện đều đạt tiêu chuẩn CE.

Bộ điều khiển có thể lập trình

Con lăn đề bên được thiết kế sát với lưỡi cắt

Loại bỏ tải trọng lò xo thông thường. Các cuộn áp suất bên có thể điều chỉnh được hoạt động bằng khí nén để đảm bảo áp suất giữ ổn định.

Con lăn đề bên được thiết kế sát với lưỡi cắt

Bàn đưa phôi

Toàn bộ bàn tiếp liệu được xử lý nhiệt bình thường để có độ ổn định tối đa. Tất cả các bàn trừ bàn nhận phía sau Đầu dưới đầu tiên đều được mạ Crom để có tuổi thọ cao. Việc điều chỉnh hàng rào được thực hiện nhanh chóng nhờ mức cài đặt nhanh. Hàng rào cũng như Table & Btm tiến dao. Các cuộn có thể điều chỉnh nhanh chóng với các đầu đọc vị trí kỹ thuật số.

Bàn đưa phôi

Hộp số tải nặng

Các con lăn cấp liệu được dẫn động thông qua sự kết hợp của Trục và Hộp số Đa năng Cực nặng, đảm bảo không làm mất khả năng truyền lực. Một hiệu ứng cho ăn trơn tru được đảm bảo. Các hộp số hạng nặng không có phản ứng dữ dội và cung cấp hiệu suất nạp liệu mạnh mẽ và chính xác.

Hộp số tải nặng

Có tấm đè bằng khí nén phía sau trục dao cuối cùng mặt dưới

Tấm áp suất nổi được điều khiển bằng khí nén đảm bảo chất lượng đồng nhất với độ linh hoạt trên mức trung bình cho các hình dạng phôi khác nhau.


Nếu phôi rộng hơn có thể đặt riêng

LMC-630 | 6-SPINDLE

LMC-630 6-SPINDLE

LMC-730 | 7-SPINDLE

LMC-730 7-SPINDLE

LMC-830 | 8-SPINDLE

LMC-830 8-SPINDLE

LMC-530 | 5-SPINDLE

LMC-530 5-SPINDLE

LMC-630 | 6-SPINDLE

LMC-630 6-SPINDLE

LMC-730 | 7-SPINDLE

LMC-730 7-SPINDLE

LMC-830 | 8-SPINDLE

LMC-830 8-SPINDLE

LMC-930 | 9-SPINDLE

LMC-930 9-SPINDLE

Xem Catalogue Máy bào bốn mặt bản rộng - LMC MAXIMAC 300 mm

LMC Leadership Through Performance and Reliability

LEADERMAC's wide variety of 4-sided moulders have all the very latest in technology for increased productivity, product quality & reliability. These Heavy Duty Moulders are designed to provide fast cutting speeds and the highest quality accuracy. The machines are precision manufactured by our highly skilled technicians - plus Leadermac's fast service, training, and moulding know-how is offered with each moulder. No matter what your moulding jobs call for, there is a Leadermac 4 sided moulder that's right for you.


For All Your Wookworking Applications

hoice of Machine Models - from Maximac LMC-230M (2-spindle) to LMC-1130M (11-spindle)

TOP CUTTERHEAD FIXING CYLINDER

The top cutterhead is fixed by an additional air cylinder that fully prevents the top cutterhead from slipping down

OUTSTANDING FEATURES:

  • Moulders with CE certification.
  • One-piece, Extra Heavy Cast Iron or Steel machine frame is specially heat treated for maximum stability and rigidity by standard configuration.
  • The Full Heavy Gauge Safety Enclosure serves as a chip guard and helps to reduce noise.
  • Table Surfaces, Guides, & Chip Breakers Chip Breakers & are hard-chrome plated for maximum wear resistance.
  • Multiple Pneumatic Pressure of the Feed Rolls (3 stations Infeed, Midfeed & Outfeed Rolls) can be easily set to provide an outstanding capability.
  • More Top & Bottom Rolls than almost all competitive moulders – hence better feeding and control.
  • Fast Feed Speeds of up to 48 mpm(175.2fpm) are standard and up to 90 mpm(300fpm) – optional.
  • Top Heads have outboard support beams which automatically lock/unlock when resetting the top heads.
  • Straight & profile jointer provides accurate operation with high quality finish at high speed fed rates.
  • Hydro-Loc Quick Change Outboard bearings for horizontal spindle(s).
  • Adjustment of each spindle can be easily performed using the front adjustment level.
  • Digital readouts for the Chip Breaker Shoes of top spindle(s).
  • Automatic Lubricator is provided to supply oil to the feed table.

Always Ready to Achieve Excellent Performance with Ultimate Speed and Reliability

The Power and Precision for World-Class Production & Quality

The Maximac was designed as a Heavy Duty 300mm (12”) Moulder

The Maximac Series is designed for High-Capacity, Highly Accurate Operations for large and small batch production runs. The heavy-duty spindles are dynamically balanced and run on premium super-precision bearings, for superior workpiece finish quality

The Maximac provides perfect surface quality, eliminating the need for sanding on planed and profiled surfaces. REC Setworks - Width and Thickness setting controllers are supplied as standard, lowering downtime and increasing efficiency of pattern change

FEED TABLE

The entire feed table is normalized heat treated for maximum stability. All tables except receiving table behind first Bottom Head are Chromed for long life. Fence adjustment is quickly accomplished by means of a quick-setting level. Fence as well as infeed Table & Btm. Rolls are quickly adjustable with digital position readouts.

PNEUMATIC PRESSURIZED HOLD-DOWN WHEELS

Hold-down pressure is adjustable, allowing for powerful, more stable and faster feeding.

HIGH PRECISION SPINDLE

All spindles are precision constructed and specially heat treated to provide maximum cutting stability and permanent accuracy. 4 Super Precision Bearings per Spindle, PLU Outboard Quick Set Hydro-Loc Outboard Bearing Assembly on all horizontals. They are water and dust-proof. Standard spindle speed is 6,000 RPM-std. 7200 or 8,000 RPM is optional.

CENTRALIZED LUBRICATION POINTS

Greasing to all critical parts is conveniently made by the centralized arrangement of colour coded lubrication points along the front of the machine

CONVENIENT SPINDLE ADJUSTMENT

Adjustment of all spindles are easily effected by hand or automatically for some spindles. The adjustment points are all along the front of the machine, for more convenient and faster adjustment.

FLOATING BOTTOM FEED ROLLS

The floating feature of the bottom feed rolls ensures smooth feed for any shape of wood.

AIR FLOATING PRESSURE PLATE over LAST BOTTOM HEAD

The pneumatically-controlled floating pressure plate ensures consistent quality with its above average flexibility for various shapes of workpieces.

POWERED INFEED ROLLER

The smooth initial feeding of the stock is achieved by means of the independently powered infeed rolls. There are more Top & Bottom powered Rolls than most competitors and this is a big reason for successful feeding.

HEAVY DUTY GEARBOX

The feed rolls are driven through a combination of extra heavy universal shafts and extra heavy duty gearboxes, ensuring no loss of power transmission. A smooth feeding effect is assured. The heavy duty gearbox has no backlash and provides powerful and accurate feeding performance. The top Beam is supported by 3 vertical posts, similar to the one shown.

PNEUMATIC LOADED CHIP BREAKER SHOES FOR TOP AND LEFT VERTICAL SPINDLE

The pneumatic loaded chip breaker shoes hold wood firmly for high stability during cutting.


Speed Up Your Moulding Operations with the Latest Technological Breakthroughs from LEADERMAC

GROOVE TABLE (OPT.)

Grooved Bed for running short material.

STRAIGHT KNIFE JOINTER (OPT.)

The remote-comtrolled straight jointers provide accurate operation with high repeatability. They help ensure a long service life super surface quality. (Opt.)

AUTOMATIC PROFILE JOINTER (OPT.)

The remote-controlled automatic profile jointer automatic jointers provide accurate operation with high repeatability. They help ensure a long service life and super surface quality. (OPT.)

STRAIGHT KNIFE JOINTER & AUTOMATIC PROFILE JOINTER (OPT.)

The remote-controlled straight jointers & automatic profile jointers provide accurate operation with high repeatability. They help ensure a long service life and super surface quality (OPT.)

PROSET CONTROLLER (OPT.)

  • 19" panel PC
  • Product library (1000 sets)
  • Knife library (10,000 sets)
  • Automatic machine quick setup
  • Easy and powerful functionality
  • Workpiece settings on any axis as desired
  • The width and thickness settings can be easily set using the programmable controller
  • All axes are equipped with ballscrews and rotary encoders for feedback position control, providing high positioning accuracy and better cutting quality
  • The desired values for width and thickness can be conveniently pre-set and are displayed on an LED readout

CONTROLLER

The speed is VFD Inverter controlled, and all electrical components meet CE, UL & CSA standards.

EASYSET CONTROLLER (OPT.) Touch Screen Control

  • 5.7" HMI (Memory 200 sets)
  • Automatic machine quick setup
  • Easy and powerful functionality
  • Workpiece settings on left and top axes as desired
  • The width and thickness setting can be easily set using the programmable controller
  • The desired values for thickness are displayed on and LED readout

SMARTSET CONTROLLER(OPT.) Touch Screen Control.

  • 9" HMI (Memory 300 sets)
  • Automatic machine quick setup
  • Easy and powerful functionality
  • Setworks on any axis as desired
  • The Motorized Axes: derived by inverter, transmitted by ball screw, feedback by encoder
  • The desired values for radial and axial are displayed on HMI.

Danh mục : máy bào, máy bào - chuốt chốt

Dữ liệu kỹ thuật

LMC-230 to LMC-1130

Máy bào bốn mặt bản rộng Leadermac - LMC MAXIMAC 300 mm

STANDARD EQUIPMENT: LMC-230 to LMC-1130 Available Options
Number of Heads / Spindles, min-max 2 to 11 Any Head Configuration - available
Working width(with a tool cutting circle of 163mm) 20-300mm (78"-12") to 330mm (13")
Working height(with a tool cutting circle of 163mm) 10-150mm (.39"-6") to 200mm (8")
Basic Spindle Motor capacity - Wye-Delta Soft Starts on all motors 11KW / 15HP, 15KW / 20HP to 45 KW / 60HP
Spindle Diameter 50mm 1 13/16" / 2 1/8"
Spindle Speed 6000 RPM 7200 / 8000 RPM
Tool cutting circle, first bottom spindle, min-max 125-200mm (4.9"-7.8")  
Tool cutting circle, vertical spindles, left, min-max 140-250mm (5.51"-9.8")  
Tool cutting circle, vertical spindles, right, min-max 140-250mm (5.51"-9.8")  
Tool cutting circle, horizontal spindles, top, min-max 140-250mm (5.51"-9.8")  
Tool cutting circle, horizontal spindles, bottom, min-max 140-250mm (5.51"-9.8")  
Feed Motor 11KW / 15HP 15 / 18.5KW (20 / 25HP)
Feed speed, infinitely variable by frequency (VFD) driven 6-48 m/min (19.5/175.2 fpm) 60 / 90 m/min (200 / 300 fpm)
Top Infeed Rolls - Diameter 210.2mm (8.27") 205.36mm (8.07")
Midfeed / Outfeed / Top & Bottom Feed roll Diameter 140mm (5.5")  
Top Feed Roll Width - Stacked on shafts 50mm (2")  
Bottom Feed Roll Width Full Width  
Pneumatic pressure for feed rollers, max 6 bar (85psi)  
Adjustment range for infeed table and edge jointing fence 10mm (.4")  
Adjustment range of vertical spindles (axial) 80mm (3.14")  
Adjustment range of horizontal spindles (axial) 40mm (1.57")  
Length of the Infeed / Straightening table 0.8M (31.49") 2 / 2.5 / 3M (78" / 98" / 120")
Diameter of dust hood for vertical spindle Ø175mm (6.9")  
Diameter of dust hood for horizontal spindle Ø200mm (7.9")  
Digital Readouts on All Axis of all Heads Std.  
Digital Readouts for the Chip Breaker Shoes of Top spindle Std.  
Full sound and safety Enclosure Std.  
Motorized vertical adjustment of Feed Beam Std.  
Lateral pressure multiple roller opposite first right spindle Std.  
Chainless Cardan Shaft Feed System Std.  
 
SOME OPTIONAL EQUIPMENT :
Universal Spindle, tool cutting circle min 125mm, max 200mm Opposed Side Heads
Tilting Top Beam, Tilting Feed, Tilting Feedworks, Tilting top Head Chipbreaker Rip Saw Section with up to 75kw (100HP)
Ass'y, Tilting Pressure Plate(s) Straight &/or Profile Jointers on any heads
Grooved Bed for running very short material Left (Opposite) Hand Feed
Ý kiến khách hàng
CÔNG TY TNHH THƯƠNG MẠI VĨ ĐẠI
  • 175 Hoa Lan, Phường 2, Quận Phú Nhuận, TP.HCM
  • Hotline: 079 2356 799 - 0274 3712 771
  • (84.28) 3517 3407
  • vetta@vetta.com.vn - info@vetta.com.vn - sales@vetta.com.vn
  • Xem bản đồ
CHI NHÁNH BÌNH DƯƠNG (SHOWROOM)
  • 42/17, DT743, KP Bình Phước, P. Bình Chuẩn, Tp.Thuận An, Tỉnh Bình Dương.
  • (84 274)3712 771
  • 02743712768
  • binhduong@vetta.com.vn
  • Xem bản đồ
Liên hệ VETTA
HOTLINE:
aaa
Xuân Khải:
aaa
Hoàng Anh:
aaa
Kim Tiền:
aaa
Mua lưỡi cưa:
Mua lưỡi cưa:
LH Qua Zalo:
aaa
phụ kiện krea shop , krea shop , củ sạc nhanh innostyle tv box evpad , tv box ubox , tv box hke 360 , củ sạc innostyle chất lượng thế nào