FOUR AUTOMATIC SCRAPING SPINDLE
The machine is designed with 4 automatic scraping spindles to produce patterns on a flooring
POWERED INFEED ROLLERS
The smooth initial feeding of the stock is achieved by means of the powered top infeed rollers.
Rubber top infeed rollers.
BRUSH WHEELS
There are two brush wheels (one brush wheel is standard) mounted at the outfeed end of the machine, which are used for removing wood chips on flooring after scraped.
MANUAL SCRAPING SPINDLE
By using the manual scraping spindle, the operator may move the scraping spindle freely to produce his desired pattern on a flooring.
HEAVY DUTY GEARBOXES
The feed rollers are driven through a combination of Extra Heavy Universal Shafts and Gearboxes, ensuring no loss of power transmission. A smooth feeding effect is assured.
The heavy duty gearboxes have no backlash and provide powerful and accurate feeding performance.
SIDE PRESSURE PLATE AT INFEED END
The side pressure located at the infeed end holds wood stably, allowing the wood to feed into the machine straight
MOVABLE AUXILIARY CONTROL BOX
The movable auxiliary control box is equipped at the outfeed end of the machine, providing an increased convenience when the operator stands at the outfeed end.
An emergency stop switch is also provided at the outfeed end.
TECHNICAL DATA: | HSM430-1B | HSM430-1B | HSM1830-4B |
Working width | 3"- 12" | ||
Working thickness | 10 – 50 mm | ||
Min. working length (one piece) | 2,000 mm | ||
Min. working length (one piece & one piece) | 250 mm | ||
Infeed drive motor | 5 HP (inverter controlled) | 10HP (inverter controlled) | |
Range of feed speeds | 6 – 30 m/min. | ||
Spindle number with servo motor control | 4 | 8 | 16 |
Spindle number with manual control | - | 1 | 2 |
Number of denibbing brushes | 861cm |