FEED SYSTEM
The Top / Bottom Infeed Rolls work in conjunction with a limit switch to stop the machine if workpiece is too thick or if there is a double up.
POWERED INFEED ROLLS
The smooth initial feeding of the stock is achieved by means of the independently powered infeed rolls. There are more Top & Bottom powered Rolls than most competitors and this is a big reason for successful feeding.
H.D. PNEUMATIC PRESSURIZED IDLING HOLD-DOWN ROLLS
Adjustable air pressure powerful feeding idle roller provides more stable and faster feeding.
HIGH PRECISION SPINDLES
All spindles are precision constructed and specially heat treated to provide maximum cutting stability and permanent accuracy. 4 Super Precision Bearings per Spindle provide the best most accurate spindles available. They are water and dust-proof. Standard spindle speed is 6,000 RPM and 7,200 or 8,000 RPM are optional.
CENTRALIZED LUBRICATION POINTS
Greasing to all critical parts is conveniently made by the centralized arrangement of colour coded lubrication points along the front of the machine
CONVENIENT SPINDLE ADJUSTMENT
Adjustment of all spindles are easily effected by hand or automatically for some spindles. The adjustment points are all along the front of the machine, for more convenient and faster adjustment.
STRAIGHT JOINTER (OPT.)
The remote-controlled straight jointers provide accurate operation with high repeatability. They help ensure a long service life and super surface quality. (Opt.)
REC PROGRAMMABLE CONTROLLER (Setworks)
Width and thickness setting can be easily set using the programmable controller. The desired values for width and thickness can be conveniently pre-set and are displayed on an LED. The speed is inverter controlled, and all electrical components met CE standards.
SIDE PRESSURE ROLLS AHEAD OF NEAR SIDE HEAD SPINDLE
Eliminating the conventional spring load. The adjustable side pressure rolls are pneumatically operated to ensure consistent holding pressure.
FEED TABLE
The entire feed table is normalized heat treated for maximum stability. All tables except receiving table behind first Bottom Head are Chromed for long life. Fence adjustment is quickly accomplished by means of a quick-setting level. Fence as well as infeed Table & Btm. Rolls are quickly adjustable with digital position readouts.
HEAVY DUTY GEARBOXES
The feed rollers are driven through a combination of Extra Heavy Universal Shafts and Gearboxes, ensuring no loss of power transmission. A smooth feeding effect is assured. The heavy duty gearboxes have no backlash and provides powerful and accurate feeding performance.
AIR FLOATING PRESSURE PLATE over LAST BOTTOM HEAD
The pneumatically-controlled floating pressure plate ensures consistent quality with its above average flexibility for various shapes of workpieces.
A Wide Range of Spindle Configurations (other configurations available on request)
LMC-630 6-SPINDLE |
LMC-730 7-SPINDLE |
LMC-830 8-SPINDLE |
LMC-530 5-SPINDLE |
LMC-630 6-SPINDLE |
LMC-730 7-SPINDLE |
LMC-830 8-SPINDLE |
LMC-930 9-SPINDLE |
LMC-230 to LMC-1130: | Standard Base Equipment | Available Options |
Number of Heads / Spindles, min-max | 2 to 11 | Any Head Configuration - availableto |
Working width (with a tool cutting circle of 163mm) | 20-300mm (78"-12") | to 330mm (13") |
Working height (with a tool cutting circle of 163mm) | 10-150mm (.39"-6") | to 200 or 250mm (8" or 10") |
Basic Spindle Motor capacity - Wye-Delta Soft Starts on all motors | 1 1/15 KW | to 45 KW / 60HP |
Spindle Diameter | 50mm | 1 13/16" / 2 1/8" |
Spindle Speed | 6000 RPM | 7200 / 8000 RPM |
Tool cutting circle, first bottom spindle, min-max | 125-200mm (4.9"-7.8") | |
Tool cutting circle, vertical spindles, left, min-max | 140-250mm (5.51"-9.8") | |
Tool cutting circle, vertical spindles, right, min-max | 140-250mm (5.51"-9.8") | |
Tool cutting circle, horizontal spindles, top, min-max | 140-250mm (5.51"-9.8") | |
Tool cutting circle, horizontal spindles, bottom, min-max | 140-250mm (5.51"-9.8") | |
Feed Motor | 11KW / 15HP | 15 / 18.5KW (20 / 25HP) |
Feed speed, infinitely variable by frequency (VFD) driven | 6-48 m/min (19.5/175.2 fpm) | 60 / 90 m/min (200 / 300 fpm) |
Top Infeed Rolls - Diameter | 205.36mm (8.08") | |
Midfeed / Outfeed / Top & Bottom Feed roll Diameter | 140mm (5.5") | |
Top Feed Roll Width - Stacked on shafts | 50mm (2") | |
Bottom Feed Roll Width | Full Width | |
Pneumatic pressure for feed rollers, max | 6 bar (85psi) | |
Adjustment range for infeed table and edge jointing fence | 10mm (.4") | |
Adjustment range of vertical spindles (axial) | 80mm (3.14") | |
Adjustment range of horizontal spindles (axial) | 40mm (1.57") | |
Length of the Infeed / Straightening table | 0.8M (31.49") | 2 / 2.5 / 3M (78" / 98" / 120") |
Diameter of dust hood for vertical spindle | Ø175mm (6.9") | |
Diameter of dust hood for horizontal spindle | Ø200mm (7.9") | |
Digital Readouts on All Axis of all Heads | Std. | |
Digital Readouts for the Chip Breaker Shoes of Top spindle | Std. | |
Full sound and safety Enclosure | Std. | |
Motorized vertical adjustment of Feed Beam | Std. | |
Lateral pressure multiple roller opposite first right spindle | Std. | |
Chainless Cardan Shaft Feed System | Std. | |
REC Setworks on Near Side Head (s) & Top (s) - Radial | Std. |