Extremely Short Feeding Capability actually to 200mm (8") min length if but fed.
The cutting heads are specially designed so that there is a uniquely short distance between them. This results in a superior moulding finish.
6,000, 7200 or 8,000 RPM High Speed Spindles with 4x Super Precision (ABEC 7) Bearings in each spindle.
Inverter (VFD) controlled Feed Motor with LED display. Feed Speed up to 30 m/min (100fpm).
Accurate Pressure Display
The position of the Top Head Chip Breakers & Pressure Plates are accurately displayed by digital counters. This increases cutting stability.
Liftable Auxiliary Feed Roller
The short stock powered feed mechanism provides added smoothness for short workpiece feeding. The auxiliary feed rollers are power driven for effortless feeding effect, and are quick-liftable for convenient cutterhead change or setup.
Short Stock Feeder
This device permits the feeding of short stocks with a minimum length of 8". The short stock feeder is driven by a gear drive unit for a powerful and smooth effect.
Powered Infeed Bottom Roller
Powered Infeed Bottom Roller (actually More Powered Top & Bottom Feed Rolls then almost all of our competition.
The smooth initial feeding of the stock is achieved by means of the independently powered infeed rollers.
A Wide Range of Spindle Configurations (other configurations available on request)
LMC-523 with universol spindle
|LMC-223P to LMC-823P||Standard Base Equipment||Available Options|
|Working Width (at a tool cutting circle of 140mm)||15-230mm (0.59"-9.1")||to 260mm, 300mm or 330mm (10.2", 12" or 13" optional)|
|Working Height (at a tool cutting circle of 163mm)||10-150mm (0.39"-6")||to 6mm & to 200mm or 250mm (to 1/4" & to 8" or 10") - optional|
|Number of Spindles, min-max||1 to 8 Heads / Spindles||All different types of Spindle Configurations - optional|
|Universal Last Head or Rip Saw Attachment||Available - option|
|Basic motor Capacity of Feed - VFD - Variable Frequency Drive||2.2KW / 5HP||to 18.5KW/25HP - optional|
|Feed speed, infinitely variable by frequency driven motor||6 - 30 m/min (20 - 100 fpm)||7200 RPM or 8000 RPM|
|Basic Motor Capacity per Spindle||7.5KW / 10HP Vert & 11KW / 15HP Hor.||50mm, 1 1/2", 1 13/16"|
|Spindle Speed||6000 RPM|
|Spindle Diameter||40mm (1.6")|
|Tool cutting circle, first bottom spindle, min-max||125-160mm (4.9"-6.3")|
|Tool cutting circle, vertical spindles, left, min-max||112-200mm (4.4"-7.9")|
|Tool cutting circle, vertical spindles, right, min-max||112-200mm (4.4"-7.9")|
|Tool cutting circle, horizontal spindles, top, min-max||112-200mm (4.4"-7.9")|
|Tool cutting circle, horizontal spindles, bottom, min-max||112-200mm (4.4"-7.9")|
|Feed roller diameter||140mm (5.5")|
|Top Feed roller width - each roll with multiples on all Top shafts||3 x 50mm (2")|
|Bottom Feed Roll Width||Full Width|
|Pneumatic pressure for feed rollers, max||6 bar (85psi)|
|Adjustment range for Infeed Table||10mm (0.4")|
|Adjustment range for Edge-jointing Fence||10mm (0.4")|
|Adjustment range of Vertical Ppindles (axial)||40mm (1.58")||100mm (4") - optional with setworks if desired|
|Adjustment range of Horizontal Spindles (axial)||20mm (0.79")|
|Length of the straightening table||2M (78.7")||1.5M, 2.5M or 3M (58", 98" or 120" - optional)|
|Diameter of Dust Hood for vertical spindle||125mm (5")|
|Diameter of Dust Hood for horizontal spindle||125mm (5")|
|Chainless Cardan Shaft Feed System w/ HD Gearboxes||Standard|
|Motorized vertical adjustment of feed beam||Standard|
|Lateral pressure roller opposite first right spindle||Spring Tensioned Standard||Pneumatic Tensioned - optional|
|Sectional Radial Lift - Linage Style Top Head Chipbreakers||Spring Tensioned Standard||Pneumatic Tensioned - optional|
|Mechanical digital readouts for the pressure shoes & hold-down unit||Standard||Metric or Inch Readouts|
|Mechanical Digital Reaouts on all Spindle Axis||Single - Std.||Dual on Near Sdie, & Tops - Radial Readouts & Quik Set - optional|
|Central location of all lubrication points at the front of the machine||Standard|
|Auot Table Lube System||Standard|
|Full sound and safety enclosure||Standard|