Leadermac 4-Side Moulder SUPER THUNDERMAC 200~300 m/min Jointed Moulder

Leadermac 4-Side Moulder SUPER THUNDERMAC 200~300 m/min Jointed Moulder

• All moulders awarded with CE certification.
• Faster feed speeds of up to 80 meters a minute (265 fpm) are standard - to 150 mpm (500fpm) - optional.
• Programmable controller provides convenient thickness and width of cut settings.
• Adjustment of each spindle can be easily performed using the front adjustment level.
• Exclusive, separate adjustment of the vertical spindles and the support tables allows the tables to be positioned extremely close to the cutterheads for added cutting stability.
• The full safety enclosure serves as a chip guard and helps to reduce noise.
• Each spindle is driven by an individual motor for powerful moulding and easy control.
• Multiple pneumatic pressure of the feed rolls can be easily set to provide an outstanding feeding effect.
• Table surfaces are hard-chrome plated for maximum wear resistance.
• All manually adjusted and turning parts are housed in dry grease lubricated bearings for oil-free lubrication.
• Automatic lubricator is provided to supply oil to the feed tables.
• One-piece, Extra Heavy machine frame is specially heat treated for maximum stability and rigidity by standard configuration.
• The powered outfeed rollers provide stable and smooth workpiece outfeed even for especially thin or smooth materials. The rollers remain perfectly parallel even after long-term use.
• Mechanical digital readouts for all head and pressure elements and the pressure elements of top spindle.
• Sectional Chip Breaker Assembly in front of top spindle.
• Motorized vertical adjustment of the top spindle including PC digital readouts.
• Finest Alloy Steel Spindles and housings with 2 sets of Ultra Precision Duplex Bearings in each spindle. All are permanently grease lubricated.
• Built in Straight and Profile jointers provide accurate operation with high quality finish.
• The full safety enclosure serves as a chip guard and helps reduce noise.

POWERED INFEED ROLLER

The smooth initial feeding of the stock is achieved by means of the independently powered top and bottom infeed rolls.

SELF ACTUATING FIRST FEED ROLLER

The first feed roller (with built-in clutch) is powered, but with high speed infeed, the roller will run freely, eliminating potential damage to the workpiece and machine. This allows for smooth operation with exceptionally high feed speeds.

DESIGNED FOR PARAMOUNT STABILITY

Powerful, heavy-duty pneumatic side and pressure shoes for the left spindle provide extremely stable pressure for high-speed operations. A pneumatic top pressure roller in front of the right vertical spindle ensures constant stock feed.

CONVENIENT SPINDLE ADJUSTMENT

Adjustment of all spindles is easily done from the front. The adjustment points are all at the same height, for more convenient and faster adjustment.

HEAVY-DUTY INDEPENDENT PRESSURE PAD

The sturdy and robust pressure pad is located above the bottom spindle, and is mounted to the machine body. This design reduces vibration and increases operation stability. The pad elevation is electronically controlled.

Heavy-duty Hydraulic Clamping Support

CENTRALIZED LUBRICATION POINTS

Greasing to all critical parts is conveniently made by the centralized arrangement of lubrication points.

FEED SYSTEM

The infeed rollers work in conjunction with a limit switch (gate) to stop the machine if workpiece is too thick or there is double up.

A Wide Range of Spindle Configurations (other configurations available on request)