The sanding head is constructed with an A type contact drum. Roller diameter 300 m/m or 420 m/m can be choose, which is ideal for sanding veneer, short panels or MDF. High precision sanding with dimensional tolerance within 0.1m/m.
The pressure plate is welded from steel plate, hard chrome plated for hardness up to RC 70°, and precise machining for a superior surface finish. Maximum stability and smoothness of panel feeding is achieved through the pressure plate incorporated with rubber covered pressure roller.
Other type:
DIGITAL READOUT CONTROLLED The conveyor raising and digital controlled. Specially designed numerical keys are accurate and easy to operate. Safety devices are provided at the infeed, the upper and lower limit end, providing a safeguard for the operator and machine. ADVANCED HYDRAULIC DRIVE CONVEYOR BELT Micro switches are fitted at both sides of the sanding belt to prevent the belt running from the track. The machine will stop automatically if there is no air supply, no sanding belt mounted, or if the belt becomes loose. Only the elevation driving motor will function. The machine will brake immediately if the sanding belt breaks during operation, providing maximum safety for operator and machine. BELT CLEANING DEVICE To ensure a clean and smooth grain surface on the abrasive belt, air is blown to thoroughly clean any dust.This greatly increases the belt's life. Once the conveyor starts, the device is also starts. A timer is equipped for controlling the sanding intervals. (Optional) |
|
SANDING BELT OSCILLATION CONTROL The sanding belt oscillation is controlled by a dust proof air eye. The sanding belt can oscillate in the event of power failure. The oscillation range of the sanding belt is 15 - 20mm. The reverse and cross sanding on the panel creates a better clarity of grain, thus greatly extending the life of the sanding belt. |
|
HYDRAULIC DRIVE CONVEYOR BELT The super lightweight driving system is mounted at the end of the conveyor table, ensuring maximum feed accuracy and stability. A powerful hydraulic driving system automatically adjusts to the correct pressure regardless of the panel weight or plate holding pressure. The system eliminates belt slipping or chattering while running. (Optional) |
|
BRUSH ROLLER Clear away the dust on the working piece in the final step. Polishing roller is upon request. (Optional) |
|
HIGH QUALITY CONVEYOR BELT The machine employs an Italian imported high quality conveyor belt, ensuring extremely smooth feeding, minimum wear, and break free performance. VACUUM SUCTION After being laminated with the veneer, the particle board usually suffers from bending. This is solved by the very close pressure plates which in conjunction with a vacuum suction device, will straighten the panels. This will not only prevent the veneer or lacquer from being over-sanded or the panel from slipping, but also increases the dust extraction effect. |
|
INVERTER The machine is built with a high performance frequency inverter which can be adjusted for any desired speed to accommodate a variety of paint and panel characteristics. |
83" Model/ Rubber Roller Dia 300mm | SV-260 | SV-290 | SV-2110 | SV-2130 |
Max. working width | 610 mm | 914 mm | 1100 mm | 1300 mm |
Max. working height | 120 mm | 120 mm | 120 mm | 120 mm |
Main spindle motor | 15 HP, 10 HP | 20 HP, 15 HP | 25 HP, 15 HP | 30 HP, 20 HP |
Hydraulic pump motor | 5 HP | 5 HP | 5 HP | 5 HP |
Table lifting & lowering motor (digital controlled) | 1/2 HP | 1/2 HP | 1 HP | 1 HP |
Brush Roller Motor | 1/2 HP | 1/2 HP | 1/2 HP | 1/2 HP |
Feed speed | 0~18 M/min | 0~18 M/min | 0~18 M/min | 0~18 M/min |
Size of sanding belt | 610 x 2108 mm | 915 x 2108 mm | 1100 x 2108 mm | 1346 x 2108 mm |
Dust exhausted | 6800 M³/hr | 6800 M³/hr | 9100 M³/hr | 9100 M³/hr |
Compressed air consumed | 0.35 M³/min | 0.35 M³/min | 0.35 M³/min | 0.35 M³/min |
Packing size | (L)2500 mm (W)1530 mm (H)2130 mm |
(L) 2500 mm (W) 1850 mm (H) 2130 mm |
(L) 2500 mm (W) 2030 mm (H) 2130 mm |
(L) 2500 mm (W) 2300 mm (H) 2130 mm |
Net weight | 2300 kgs | 3000 kgs | 3500 kgs | 4000 kgs |
Gross weight | 2500 kgs | 3250 kgs | 3800 kgs | 4350 kgs |
83" Model/ Rubber Roller Dia 300mm | SV-360 | SV-390 | SV-3110 | SV-3130 |
Max. working width | 610 mm | 914 mm | 1100 mm | 1300 mm |
Max. working height | 120 mm | 120 mm | 120 mm | 120 mm |
Main spindle motor | 15 HP, 15 HP, 10 HP | 20 HP, 20 HP, 15 HP | 25 HP, 25 HP, 15 HP | 30 HP, 25 HP, 20 HP |
Hydraulic pump motor | 5 HP | 5 HP | 7.5 HP | 7.5 HP |
Table lifting & lowering motor (digital controlled) | 1/2 HP | 1 HP | 1 HP | 1 HP |
Brush Roller Motor | 1/2 HP | 1/2 HP | 1/2 HP | 1/2 HP |
Feed speed | 0~18 M/min | 0~18 M/min | 0~18 M/min | 0~18 M/min |
Size of sanding belt | 610 x 2108 mm | 915 x 2108 mm | 1100 x 2108 mm | 1346 x 2108 mm |
Dust exhausted | 10200 M³/hr | 10200 M³/hr | 13700 M³/hr | 13700 M³/hr |
Compressed air consumed | 0.5 M³/min | 0.5 M³/min | 0.5 M³/min | 0.5 M³/min |
Packing size | (L) 2800 mm (W) 1530 mm (H) 2130 mm |
(L) 2920 mm (W) 1850 mm (H) 2130 mm |
(L) 2930 mm (W) 2030 mm (H) 2130 mm |
(L) 2930 mm (W) 2300 mm (H) 2130 mm |
Net weight | 3000 kgs | 3800 kgs | 4600 kgs | 5500 kgs |
Gross weight | 3300 kgs | 4150 kgs | 5000 kgs | 5950 kgs |
103" Model/ Rubber Roller Dia 420mm | SV-260 | SV-290 | SV-2110 | SD-2130 |
Max. working width | 610 mm | 914 mm | 1100 mm | 1300 mm |
Max. working height | 120 mm | 120 mm | 120 mm | 120 mm |
Main spindle motor | 20 HP, 15 HP | 25 HP, 20 HP | 30 HP, 25 HP | 40 HP, 25 HP |
Hydraulic pump motor | 5 HP | 5 HP | 7.5 HP | 7.5 HP |
Table lifting & lowering motor (digital controlled) | 1/2 HP | 1/2 HP | 1 HP | 1 HP |
Brush Roller Motor | 1/2 HP | 1/2 HP | 1/2 HP | 1/2 HP |
Feed speed | 0~18 M/min | 0~18 M/min | 0~18 M/min | 0~18 M/min |
Size of sanding belt | 610 x 2616 mm | 915 x 2616 mm | 1100 x 2616 mm | 1346 x 2616 mm |
Dust exhausted | 6800 M³/hr | 6800 M³/hr | 9100 M³/hr | 9100 M³/hr |
Compressed air consumed | 0.35 M³/min | 0.35 M³/min | 0.35 M³/min | 0.35 M³/min |
Packing size | (L) 2550 mm (W) 1600 mm (H) 2330 mm |
(L) 2550 mm (W) 1900 mm (H) 2330 mm |
(L) 2550 mm (W) 2100 mm (H) 2330 mm |
(L) 2550 mm (W) 2300 mm (H) 2330 mm |
Net weight | 3500 kgs | 4300 kgs | 4900 kgs | 5500 kgs |
Gross weight | 3800 kgs | 4650 kgs | 5300 kgs | 5950 kgs |
103" Model/ Rubber Roller Dia 420mm | SV-360 | SV-390 | SV-3110 | SV-3130 |
Max. working width | 610 mm | 914 mm | 1100 mm | 1300 mm |
Max. working height | 120 mm | 120 mm | 120 mm | 120 mm |
Main spindle motor | 20 HP, 15 HP, 15 HP | 25 HP, 20 HP, 15 HP | 30 HP, 25 HP, 20 HP | 40 HP, 30 HP, 25 HP |
Hydraulic pump motor | 5 HP | 5 HP | 7.5 HP | 7.5 HP |
Table lifting & lowering motor (digital controlled) | 1/2 HP | 1 HP | 1 HP | 1 HP |
Brush Roller Motor | 1/2 HP | 1/2 HP | 1/2 HP | 1/2 HP |
Feed speed | 0~18 M/min | 0~18 M/min | 0~18 M/min | 0~18 M/min |
Size of sanding belt | 610 x 2616 mm | 915 x 2616 mm | 1100 x 2616 mm | 1346 x 2616 mm |
Dust exhausted | 10200 M³/hr | 10200 M³/hr | 13700 M³/hr | 13700 M³/hr |
Compressed air consumed | 0.5 M³/min | 0.5 M³/min | 0.5 M³/min | 0.5 M³/min |
Packing size | (L) 3200 mm (W) 1600 mm (H) 2330 mm |
(L) 3200 mm (W) 1900 mm (H) 2330 mm |
(L) 3200 mm (W) 2100 mm (H) 2330 mm |
(L) 3200 mm (W) 2300 mm (H) 2330 mm |
Net weight | 4000 kgs | 5100 kgs | 6000 kgs | 7200 kgs |
Gross weight | 4400 kgs | 5550 kgs | 6500 kgs | 7800 kgs |