JUN SHIAU - SHENG SHING

Máy chà nhám thùng sheng shing SD series

Máy chà nhám thùng sheng shing SD series
Khu vực Hồ Chí Minh
  • 175 Hoa Lan, Phường 2, Quận Phú Nhuận, TP.HCM
  • Hotline: 079 2356 799 - 0274 3712 771
  • (84.28) 3517 3407
  • vetta@vetta.com.vn - info@vetta.com.vn - sales@vetta.com.vn
Ưu điểm

Máy chà nhám thùng sheng shing SD series

new_sd_11

Working Width from 610mm to 1300mm. 
Two heads: 1st. and 2nd. are roller type is ideal for general sanding
Three heads: 1st. and 2nd. and 3rd. are roller type, it can do calibration and fine sanding in one pass.
Planer / cutter head is upon request.

The three head series consists of a contact drum at the first, second and third head, providing extremely
fine finishing.

new_sd_18_01new_sd_18_02new_sd_18_03new_sd_18_04

The orther types:

sd

new_sd_22

DIGITAL READOUT CONTROLLED

The conveyor raising and digital controlled. Specially designed numerical keys are accurate and easy to operate. Safety devices are provided at the infeed, the upper and lower limit end, providing a safeguard for the operator and machine.

ADVANCED HYDRAULIC DRIVE CONVEYOR BELT

Micro switches are fitted at both sides of the sanding belt to prevent the belt running from the track. The machine will stop automatically if there is no air supply, no sanding belt mounted, or if the belt becomes loose. Only the elevation driving motor will function. The machine will brake immediately if the sanding belt breaks during operation, providing maximum safety for operator and machine.

BELT CLEANING DEVICE

To ensure a clean and smooth grain surface on the abrasive belt, air is blown to thoroughly clean any dust.This greatly increases the belt's life. Once the conveyor starts, the device is also starts. A timer is equipped for controlling the sanding intervals. (Optional)

new_sd_25

SANDING BELT OSCILLATION CONTROL

The sanding belt oscillation is controlled by a dust proof air eye. The sanding belt can oscillate in the event of power failure. The oscillation range of the sanding belt is 15 - 20mm. The reverse and cross sanding on the panel creates a better clarity of grain, thus greatly extending the life of the sanding belt.

new_sd_27

HYDRAULIC DRIVE CONVEYOR BELT

The super lightweight driving system is mounted at the end of the conveyor table, ensuring maximum feed accuracy and stability. A powerful hydraulic driving system automatically adjusts to the correct pressure regardless of the panel weight or plate holding pressure. The system eliminates belt slipping or chattering while running. (Optional)

new_sd_29

BRUSH ROLLER

Clear away the dust on the working piece in the final step.

 

Dữ liệu kỹ thuật
75" Model
75" Model/ Rubber Roller Dia 250mm SD-260 SD-290 SD-2110 SD-2130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 15 HP, 10 HP 20 HP, 15 HP 30 HP, 20 HP 40 HP, 20 HP
Feed motor 2 HP 2 HP 3 HP 3 HP
Table lifting & lowering motor (digital controlled) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Brush Roller Motor (optional) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 4~18 M/min 4~18 M/min 4~18 M/min 4~18 M/min
Size of sanding belt 610 x 1905 mm 915 x 1905 mm 1100 x 1905 mm 1346 x 1905 mm
Dust exhausted 6800 M³/hr 6800 M³/hr 9100 M³/hr 9100 M³/hr
Compressed air consumed 0.35 M³/min 0.35 M³/min 0.35 M³/min 0.35 M³/min
Packing size (L) 2230 mm
(W) 1480 mm
(H) 2050 mm
(L) 2230 mm
(W) 1820 mm
(H) 2050 mm
(L) 2230 mm
(W) 2030 mm
(H) 2050 mm
(L) 2500 mm
(W) 2300 mm
(H) 2050 mm
Net weight 2000 kgs 2600 kgs 3000 kgs 3500 kgs
Gross weight 2300 kgs 2850 kgs 3300 kgs 3850 kgs

 

75" Model
75" Model/ Rubber Roller Dia 250mm SD-360 SD-390 SD-3110 SD-3130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 20 HP, 15 HP, 10 HP 25 HP, 20 HP, 15 HP 30HP, 25 HP, 20 HP 40 HP, 30 HP, 20 HP
Hydraulic pump motor 5 HP 5 HP 7.5 HP 7.5 HP
Table lifting & lowering motor (digital controlled) 1/2 HP 1 HP 1 HP 1 HP
Brush Roller Motor (optional) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 0~18 M/min 0~18 M/min 0~18 M/min 0~18 M/min
Size of sanding belt 610 x 1905 mm 915 x 1905 mm 1100 x 1905 mm 1346 x 1905 mm
Dust exhausted 10200 M³/hr 10200 M³/hr 13700 M³/hr 13700 M³/hr
Compressed air consumed 0.5 M³/min 0.5 M³/min 0.5 M³/min 0.5 M³/min
Packing size (L) 2760 mm
(W) 1480 mm
(H) 2050 mm
(L) 2920 mm
(W) 1820 mm
(H) 2050 mm
(L) 2930 mm
(W) 2030 mm
(H) 2050 mm
(L) 2930 mm
(W) 2300 mm
(H) 2050 mm
Net weight 2600 kgs 3400 kgs 4200 kgs 5000 kgs
Gross weight 2850 kgs 3700 kgs 4550 kgs 5500 kgs

 

83" Model
83" Model/Rubber Roller Dia 300mm SD-260 SD-290 SD-2110 SD-2130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 15 HP, 10 HP 25 HP, 15 HP 30 HP, 20 HP 40 HP, 20 HP
Hydraulic pump motor - - - 5 HP
Feed motor 2 HP 3 HP 3 HP -
Table lifting & lowering motor (digital controlled) 1/2 HP 1/2 HP 1 HP 1 HP
Brush Roller Motor (optional) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 4~18 M/min 4~18 M/min 4~18 M/min 0~18 M/min
Size of sanding belt 610 x 2108 mm 915 x 2108 mm 1100 x 2108 mm 1346 x 2108 mm
Dust exhausted 6800 M³/hr 6800 M³/hr 9100 M³/hr 9100 M³/hr
Compressed air consumed 0.35 M³/min 0.35 M³/min 0.35 M³/min 0.35 M³/min
Packing size (L) 2300 mm
(W) 1530 mm
(H) 2130 mm
(L) 2300 mm
(W) 1850 mm
(H) 2130 mm
(L) 2400 mm
(W) 2030 mm
(H) 2130 mm
(L) 2500 mm
(W) 2300 mm
(H) 2130 mm
Net weight 2300 kgs 3000 kgs 3500 kgs 4000 kgs
Gross weight 2500 kgs 3250 kgs 3800 kgs 4350 kgs

 

83" Model
83" Model/ Rubber Roller Dia 300mm SD-360 SD-390 SD-3110 SD-3130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 20 HP, 15 HP, 10 HP 25 HP, 20 HP, 15 HP 30 HP, 25 HP, 15 HP 40 HP, 30 HP, 20 HP
Hydraulic pump motor 5 HP 5 HP 7.5 HP 7.5 HP
Table lifting & lowering motor (digital controlled) 1/2 HP 1 HP 1 HP 1 HP
Brush Roller Motor (optional) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 0~18 M/min 0~18 M/min 0~18 M/min 0~18 M/min
Size of sanding belt 610 x 2108 mm 915 x 2108 mm 1100 x 2108 mm 1346 x 2108 mm
Dust exhausted 10200 M³/hr 10200 M³/hr 13700 M³/hr 13700 M³/hr
Compressed air consumed 0.5 M³/min 0.5 M³/min 0.5 M³/min 0.5 M³/min
Packing size (L) 2800 mm
(W) 1530 mm
(H) 2130 mm
(L) 2920 mm
(W) 1850 mm
(H) 2130 mm
(L) 2930 mm
(W) 2030 mm
(H) 2130 mm
(L) 2930 mm
(W) 2300 mm
(H) 2130 mm
Net weight 3000 kgs 3800 kgs 4600 kgs 5500 kgs
Gross weight 3300 kgs 4150 kgs 5000 kgs 5950 kgs

 

103" Model
103" Model/Rubber Roller Dia 420mm SD-260 SD-290 SD-2110 SD-2130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 20 HP, 15 HP 25 HP, 15 HP 40 HP, 20 HP 50 HP, 25 HP
Hydraulic pump motor 5 HP 5 HP 5 HP 5 HP
Table lifting & lowering motor (digital controlled) 1/2 HP 1/2 HP 1 HP 1 HP
Brush Roller Motor (optional) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 0~18 M/min 0~18 M/min 0~18 M/min 0~18 M/min
Size of sanding belt 610 x 2616 mm 915 x 2616 mm 1100 x 2616 mm 1346 x 2616 mm
Dust exhausted 6800 M³/hr 6800 M³/hr 9100 M³/hr 9100 M³/hr
Compressed air consumed 0.35 M³/min 0.35 M³/min 0.35 M³/min 0.35 M³/min
Packing size (L) 2650 mm
(W) 1600 mm
(H) 2330 mm
(L) 2550 mm
(W) 1900 mm
(H) 2330 mm
(L) 2550 mm
(W) 2100 mm
(H) 2330 mm
(L) 2550 mm
(W) 2300 mm
(H) 2330 mm
Net weight 3500 kgs 4300 kgs 4900 kgs 5500 kgs
Gross weight 3800 kgs 4650 kgs 5300 kgs 5950 kgs

 

103" Model
103" Model/Rubber Roller Dia 420mm SD-360 SD-390 SD-3110 SD-3130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 25HP, 20HP, 15HP 30HP, 25HP, 15HP 40HP, 30HP, 20HP 50 HP, 40 HP, 25 HP
Hydraulic pump motor 5 HP 5 HP 7.5 HP 7.5 HP
Table lifting & lowering motor (digital controlled) 1/2 HP 1 HP 1 HP 1 HP
Brush Roller Motor (optional) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 0~18 M/min 0~18 M/min 0~18 M/min 0~18 M/min
Size of sanding belt 610 x 2616 mm 915 x 2616 mm 1100 x 2616 mm 1346 x 2616 mm
Dust exhausted 10200 M³/hr 10200 M³/hr 13700 M³/hr 13700 M³/hr
Compressed air consumed 0.5 M³/min 0.5 M³/min 0.5 M³/min 0.5 M³/min
Packing size (L) 3200 mm
(W) 1600 mm
(H) 2330 mm
(L) 3200 mm
(W) 1900 mm
(H) 2330 mm
(L) 3200 mm
(W) 2100 mm
(H) 2330 mm
(L) 3200 mm
(W) 2300 mm
(H) 2330 mm&
Video

 

Ý kiến khách hàng
CÔNG TY TNHH THƯƠNG MẠI VĨ ĐẠI
  • 175 Hoa Lan, Phường 2, Quận Phú Nhuận, TP.HCM
  • Hotline: 079 2356 799 - 0274 3712 771
  • (84.28) 3517 3407
  • vetta@vetta.com.vn - info@vetta.com.vn - sales@vetta.com.vn
  • Xem bản đồ
CHI NHÁNH BÌNH DƯƠNG (SHOWROOM)
  • 42/17, DT743, KP Bình Phước, P. Bình Chuẩn, Tp.Thuận An, Tỉnh Bình Dương.
  • (84 274)3712 771
  • 02743712768
  • binhduong@vetta.com.vn
  • Xem bản đồ
Liên hệ VETTA
HOTLINE:
aaa
Xuân Khải:
aaa
Hoàng Anh:
aaa
Kim Tiền:
aaa
Mua lưỡi cưa:
Mua lưỡi cưa:
LH Qua Zalo:
aaa
phụ kiện krea shop , krea shop , củ sạc nhanh innostyle tv box evpad , tv box ubox , tv box hke 360 , củ sạc innostyle chất lượng thế nào